1965 Beaumont Street Stock and 1999 West Coast custom built 17.5" trailer for sale. This car is an old Langley Speedway car that was originally built to race there in 1976. We purchased the car from the original owner in 1991, and race it at Agassiz, but haven't had it out now for a couple of years. It is a well built, legal car. The engine has only 3 racedays on it and it runs very strong. The car is $6,500 and the trailer is $2,500. Email ewhellin@hotmail.com for pictures and info.
2009 Monte Carlo, Alien Chassis. Power glide transmission, 9" rear end, Exhaust, rad, 2 gear sets. Stock clip Alien chassis, lots of spare parts and pieces. Very competitive car. Roller $6,500. Call 604-583-1441 or email whiplash@shaw.ca
I am selling the I am selling the #73 Street Stock. It has 602 crate steel bushing in the front control arm, nine inch rear end 3 speed sagnaw mini sppol qa1shocks. Well maintained, very fast and consistently took first in the last race in Vernon and two third place finishes. Have spare rims and a few tires. Asking $8500. Turn key or will sell as roller if you don't want the crate engine. Please call 250-870-0507 or email alldayautomotive@hotmail.com for more information..
For Sale Best Offer
4 angle iron door bars ( mini stock ), 1 front and 1 middle cross brace ( both expandable ), 2 - 5 point harnesses, 1 steel and 1 aluminum gas tank, 2 battery boxes, 2 angle iron door bars ( derby car ) , misc. used 1 inch nuts, bolts and plates
If interested please call Jim at 604-218-5108
.
I have extra radios for sale for cars and pit crews. Can also program radios. Contact Dave at dave99@telus.net for more information.
Driver available for any class. If you can't make a race date and are running for points, make the most of it. Put me in your car. I have a winning record in Streets, Midgets, Dwarfs, Hornets and Mini's. Many different arrangements can be accommodated in regard to getting the car to the track, etc. Contact Murray Jones at 778-549-6521 or racingmurman@gmail.com
I have a Terry Kershaw built motor for sale. It has never been on the track, only been on the dyno, asking $3500 obo. Monte Carlo street stock from Yakima $500. Bran new racing radios, 10000 rpm clutch, Hans device, tires, wheels all new. Need to sell. Contact Ryan for more info at 604-807-5367
1977 Camaro Chassis-S10 extra cab body, comes complete with engine refreshed before season start. Powerglide auto trans, complete with extra engine, 3 extra 10 bolt rear ends with different gears installed, 3.08; 3.42; 3.73/ 5 extra axles, extra front suspension parts, hubs spindles, etc./ Extra front frame section/New plastic front nose sections/ Extra fuel cell - 8 gallon/ 6 extra wheels with tires siped for dirt, 4-8" & 2-7"/ 7" lite weight wheels on car/ recall tach/ lite steering wheel/fireproof padding. This car is fast and very safe. Won a couple of races in 2011 in Agassiz and second in points. Raced all over the province in 2012, won some races on the dirt at Merritt and placed 8th overall in the Street Stock Challenge event even after 2 bad luck nights at Western Speedway with blown and flattened tires. Asking $7500 for all or trade for a really nice highway bike (no crotch rockets) Will consider delivery to within a couple hours of Langley.
I am looking to buy a large racing suit new or used to race in Aggassiz this year. Email gdcanadiankid@hotmail.com.
Six (6) Aero Stock car wheels ... 15 by 10 inch ... 4 inch backset ... $120.00
Brand new quarter master hydraulic throw out bearing part #721100 and rebuild kit 721101 for Chevy. was bought for my 52 Chevy but went different diretion ... $200.00
Call Tony at 604-588-6500
1) 30 2011 foot trailer Mirage LED like new. Torsion Axlesm checker plate, vents, LED lights,
very low miles. Asking $10,000
2) Winch for car trailer, works well $25.00
3) Dodge colt Mini Stock - needs to have engine finished and put back in. hasnt raced for years but used to be a fast Agassiz car. includes gasket kit for enginem new timing belt, etc. Just dont have time to finish. Cost $700 (just the price of new engine and parts.
4) Drift Camera Accessories for sale.
5) Lots of Go Pro accessories mostly new still in packaging. 1/2 price.
MORE:
6) Used Pro Rolll cage will fit most imports. Made from 4130 Chrome Moly Steel (not chromed) $450.00 reduced to $300.00
7) Racing seat, net, seat belt, excellent shape $225.00
Contact Peter Chick at ccaviation@shaw.ca or text/phone 604-795-0911
1992 Celica GTS - new engine, alloy rad, ss header with heat wrap. Runs great and is race ready. Asking $1000.00 Call Andy in Kelowna at 250 215-1329
Racing impact helmet. like new. used 5 times or less. size small. comes with extra visor thats tinted 99$ obo Email Mike at m1k3.mosher@gmail.com
Monte Carlo SS street stock. Ford 9 inch. New engine 6 races ago and have not run for 2 years. Frame is solid with minor body dings. Many spare parts. All engine work done at KS machine(over 10K) and set up at classic automotive. $6500.00. Have beaver tail trailer for sale with 6x6x6 parts cage for $3500.00. Call 250-878-4040 Troy
1 set of 041 heads completely done with screw-in studs/guide plates, new springs for .550 lift and positive seals, date code G 8 8 on both.
1 set of 370 heads completely done with screw in studs/guide plates, new springs for .550 life and positive seals, 2.02/1.6 date code A 15.0 & B 5.0
1 set of vortecs 062 with new springs for .525 lift and machined for retainer clearance with positive seals. All heads resurfaced.
$550.00 for each set or make a decent offer
Phone: 250-495-2469 or 250-498-7699 or email fredsmechservice@oersona.ca
I am looking for a built hornet car preferably a Honda or acura but will look at others contact me at 604-703-9369
RCI men's XL racing suit $150.00
Aluminum racing seat with black and yellow cover $175.00
RCI black neck brace $30.00
RCI black window net $30.00
All used for one race season. Call or text to 604-997-5953
.jpg)
.jpg)
.jpg)
Camaro street stock for sale, car is not complete, needs a few weekends in the fabrication shop to complete. Car has new leafs springs, new master cylinder, two ford nine inch rear ends, nine inch is complete with backing plates axles and differential is legal to run at Agassiz. All suspension parts are in boxes and sand blasted, steering box, brake pedal assemblies are all in boxes too. Car has a complete camaro body, fenders, bumpers, hood and nose. Subframe connectors are in, rear frame rails are now boxed in, roll cage is a bought kit, very nice car, never raced or has been to the race track yet, car is welded to trailer because I built a jig on trailer to make it easy to roll in and out of shop.
Trailer is a 2009 snake river 18' dove tail with wooden ramps. I built a tool box in front of trailer that measures three feet long and three and a half feet tall, 3000lbs winch powered by its own batteries in front to load car easily, trailer has auxiliary rear lights and inside tool box for loading at night, trailer axles are rated at 3000lbs. Tool box is a steel frame wrapped inn aluminum, inside of tool box is wrapped in insulation foam, LED lighting looks good at night going down highway.
Tools that come with are a pneumatic tube blender with all the dies, a plasma cutter with spare electrodes and tips, a bead roller, bench grinder, vise, and all the rest of my racing junk.
Asking $5000 for everything. This is a really great deal for someone who wants to get into the street stocks or someone who needs to refresh their street stock program, or someone who's like buying up racing junk, hahaha! I can email you more pictures or you can come look at the car in Port Kells, Surrey.
My contact info: 604-250-0914 text, call or leave voicemail or email me at lquewezancejr@gmail.com
1993 Mustang Ministock. Engine built by Bobby Collins Racing Engines with a rare 2300 German block. He also reworked it in 2012 with a custom ground Isky cam and other performance parts to create 10.85 to one compression. Built-in Fire Suppression system. Numerous spare transmissions with different ratios, extra engine blocks and spare heads. Extra “Oval Port” and “D- Port” intake manifolds. Locked and unlocked rearends. Lots of other spare parts. Raced with IMS4 at Western Speedway and Saratoga. Turn-key. $4,500.00 or best offer. (250) 920-9435
FS: Ram Horn Exhaust left side #3855163 for 64-68 Chevy $40
Pair of Chevy Log Style Exhaust $40pr
2- Chevy Logs RH side only $20 ea
Paul in Aldergrove (604)856 7264
Classifieds will be posted for a period of 60 days from entry onto the website. The ads will be automatically removed after that time unless a request to continue the listing has been received to the email address above. If you are including pics with your ad, please send in jpeg format and no larger than 640 x 480 pixels in size. Please inform us if your ad has been successful so we can make that adjustment.
PLEASE NOTE: Neither the webmaster, Agassiz Speedway, nor anyone related to our organization is responsible for the merchandise sold, purchased or traded. Any disputed transaction will be dealt with by the party/parties from which purchased, sold or traded.